Flocon 4200 Alumina Magnesia Spinel Refractory Ladle Sliding Gate Plate for Slide Mechanism
SNREF Slide Gate Plate adopts High quality bauxite material , also takes tabular alumina, carbonaceous material and zirconia-containing material as main raw materials, adds in high performance antioxidants, uses phenolic resin as binder, formed under high-pressure and burned under high temperature. The slide plates have the advantages of high strength, good erosion resistance, thermal shock resistance and good stability etc., mainly used in large and medium-sized ladle.
The Important Role of Alumina Magnesia Spinel in the Steelmaking Industry
Optimize the Refractory Performance:
Alumina magnesia spinel has a high melting point, excellent thermal stability, and good mechanical strength. It can maintain a stable structure at high temperatures, enhancing the refractoriness and load softening temperature of refractory materials used in steelmaking. This enables the refractory materials to better withstand the hydrostatic pressure of molten steel and the effect of high temperatures.
Reduce the Thermal Conductivity:
With a relatively low thermal conductivity, it can reduce the heat loss during the steelmaking process, playing an excellent role in heat insulation and thermal preservation. This is beneficial for reducing energy consumption and improving the efficiency of steelmaking.
Inhibit the Penetration of Molten Steel:
Alumina magnesia spinel can effectively prevent molten steel and furnace slag from penetrating into the interior of refractory materials, avoiding the structural damage and performance degradation of the materials caused by penetration. As a result, it can extend the service life of refractory materials and reduce production costs.
| Chemical and Physical Properties |
Ladle Slide Gate Plate (General) |
| Magnesia material |
Al-C |
Al- Zr-C |
| apparent porosity % max |
10 |
8 |
8 |
| Bulk Density g/cm3 min |
3.0 |
3.05 |
3.1 |
| Compressive strength MPa min |
120 |
120 |
120 |
| Al2O3 % min |
8 |
85 |
85 |
| ZrO2 % min |
|
|
4 |
| C % min |
3 |
3 |
3 |
| MgO % |
65 min |
|
|
| Service Life heats |
1-2 |
1-3 |
1-5 |
Service Result for slide gate plate and nozzle system:
Service life depends on many points:
1)Different Raw Material,
2)Production Process(Firing temperature, oil immersion, drying temperature...)
3)Steel type
4)Steel making condition
5)Different operation mode
And so on....
Flocon 4200 Alumina Magnesia Spinel Refractory Ladle Sliding Gate Plate for Slide Mechanism
The slide plates have the advantages of high strength, good erosion resistance, thermal shock resistance and good stability etc.,mainly used in large and medium-sized ladle.
Shandong Sinorefractory New Materials Co.,Ltd (SinoRefractory)has been focusing on international marketing of flow control refractories in iron and steel industry for 17 years.
SinoRefractory is the second generation of refractories export enterprise developed out of EMEI Group.Supported by one of China's largest production bases in functional refractory materials.
Through years of development in the field of exporting top quality refractories to worldwide markets,SinoRefractory aims at researching,producing,marketing and exporting high standard Ladle slide gate plate,Ladle Nozzles,Well blocks,Purging plugs,Nozzle stuffing sand,Refractory castables, Slide gate Mechanisms etc.
Up to now,SinoRefractory has supplied high quality refractory products and services to nearly 70 top-hundred global steel enterprises.
SinoRefractory will always put clients'interest in the first place,striving to provide a wide range of services,including technical solution,pre-sales support,after-sales services,installation team support,professional know-how according to the changing of steelmaking condition,etc.
We are not only selling products,we are more focused on supporting,developing and growing together with clients.
Ladle Refractory Slide Gate Plate in Steel Mill Pant, for flow control the steel molten.
Below are some FAQ and answers about ladle and tundish flow control refractories:
Q: What are the requirements for refractories for ladle?
A: The requirements of refractories for ladle mainly include:
* high temperature resistance
* thermal shock resistance
* resistance to the erosion of the slag
* high temperature with sufficient mechanical strength
* the lining has a certain degree of expansion
Q:What are the reasons for the destruction of refractories for ladle?
A: The main causes of damage are as follows:
When the ladle transports high-temperature molten steel, the high-temperature molten steel and slag at about 1680ºC scour and erode it, especially in the slag line part, the scouring and erosion is more serious, and it is an important factor to decide the service life of the ladle.
LF and other extra-oven refining treatment on the unburnt brick damage is serious.
Q:What steel grades are different materials of slide plate bricks suitable for respectively?
A: Different materials of slide plate bricks are applicable to different steel grades. For example,
Al2O3-ZrO2-C slide gate plate can be used as ladle sliding gate plate due to its excellent erosion resistance and thermal shock stability, which can adapt to the casting of various steel grades, and ther are the following materilas based on customer's steel making condition: the MgO-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, MgO-Al-C, and so on.
For more details, feel free to send inquiry to us.
Audited Supplier 
){kind=link}